How do I get the pedals to fit ?

1096 views  October 23, 2019

The end of the pedals are marked with an L for left or an R for right. The left pedal is for the crank arm without the chainring on it. The right is for the arm with the ring.
Both pedal threads should be lightly greased to assist fitting and in case of removal at a later date.
The left pedal threads on anti clockwise and should go on easily by hand. If this is not the case it may be going on squint ( cross threaded ). The right pedal threads on clockwise. Once fitted both pedals should be fully tightened with a 15mm spanner. This prevents the pedals unscrewing and damaging the crank arms.

Did you find it helpful?
To Top